M ONE X

HELIX M ONE X

Small, efficient and uncompromisingly stable - the M ONE X is a highly compact monoblock for subwoofer applications. Designed from latest Class D technology this tiny amp can easily control speakers with 1 Ohm impedance. Its current capability makes the M ONE X a perfect partner for 2 x 2 Ohms subwoofers, where both voice coils are connected in parallel. And for even more output power, two M ONE X amplifiers can be combined to one single powerhouse – thanks to the TwinPower Link.

Features: 

  • Small footprint Class D amplifier with up to 1,180 Watts RMS output power @ 1 Ohm for easiest combination with all 2 x 2 Ohms subwoofers connected in parallel

  • Start-Stop capability down to 6V supply voltage

  • Smart highlevel input with ADEP circuit and Auto Turn-On function

  • Integrated, active crossover with lowpass, bass boost, subsonicand phase control

  • TwinPower Link for connecting two amplifiers in bridged mode

  • Bass remote control for volume adjustment

  • Low heat dissipation thanks to extraordinary efficiency

M FOUR

HELIX M FOUR

If you like to rev up your front and rear speakers, the M FOUR will be exactly the right "tool" to do so. With generously 100 Watts RMS per channel into both 4 Ohms and 2 Ohms load this amp will heat up your voice coils in no time despite its super-compact dimensions. On the other hand the M FOUR stays totally cool thanks to the highly efficient Class D design topology. 3-channel or 2-channel configurations are possible as well, delivering up to 2 x 200 Watts RMS of clean and undistorted output power.

Features:

  • Small footprint Class D amplifier with high output power of 100 Watts RMS @ 4 and 2 Ohms load

  • Start-Stop capability down to 6V supply voltage

  • Smart highlevel input with ADEP circuit (Advanced Diagnostics Error Protection) and Auto Turn-On function

  • Integrated, active crossover with highpass, lowpass and bandpass

  • “Input mode” switch for flexible input signal routing

  • SMD (Surface Mounted Device) manufacturing technology combines minimum space requirement with maximum reliability

  • Exclusive, extremely compact and clean design with illuminated HELIX-logo and low heat dissipation thanks to extraordinary efficiency

M ONE

HELIX M ONE

Small, efficient and uncompromisingly stable - the M ONE is a highly compact monoblock for subwoofer applications. Designed from latest Class D technology this tiny amp can easily control speakers with 1 Ohm impedance. Its current capability makes the M ONE a perfect partner for 2 x 2 Ohms subwoofers, where both voice coils are connected in parallel.

Features:

  • Small footprint Class D amplifier with high output power of 600 Watts RMS @ 1 Ohm for easiest combination with all 2 x 2 Ohms subwoofers connected in parallel

  • Start-Stop capability down to 6V supply voltage

  • Smart highlevel input with ADEP circuit (Advanced Diagnostics Error Protection) and Auto Turn-On function

  • Integrated, active crossover with lowpass, bass boost, subsonic and phase control

  • Extremely stable output stage with high-current power transistors and 1 Ohm stability

  • Bass remote control for volume adjustment

  • SMD (Surface Mounted Device) manufacturing technology combines minimum space requirement with maximum reliability

  • Exclusive, extremely compact and clean design with illuminated HELIX-logo and low heat dissipation thanks to extraordinary efficiency

M SIX

HELIX M SIX

One for all – no matter if 3-way, 2-way or subwoofer application, the 6-channel amplifier M SIX will always be the right choice.
With generously 100 Watts RMS per channel into both 4 Ohms and 2 Ohms load this amp really gets your speaker cones going despite its super-compact dimensions. On the other hand the M SIX stays totally cool thanks to its highly efficient Class D design topology. And even bridged configurations are possible, delivering up to 3 x 200 Watts RMS of clean and undistorted output power.

Features:

  • Small footprint Class D amplifier with high output power of 100 Watts RMS @ 4 and 2 Ohms load

  • Start-Stop capability down to 6V supply voltage

  • 6-channel lowlevel input

  • Integrated, active crossover with highpass, lowpass, bandpass and subsonic

  • “Input mode” switch for channel E & F for flexible input signal routing

  • SMD (Surface Mounted Device) manufacturing technology combines minimum space requirement with maximum reliability

  • Exclusive, extremely compact and clean design with illuminated HELIX-logo and low heat dissipation thanks to extraordinary efficiency

Please reload

DSP MINI

HELIX DSP MINI

Small in size, huge in sound!

High tech in compact dimensions – despite its size, the HELIX DSP MINI is crammed with state-of-the-art technology. A 64 Bit Audio DSP of the latest generation in combination with a sampling rate of 96 kHz and a High Resolution audio bandwidth up to more than 40 kHz provides phenomenal sound quality. In addition, the DSP MINI offers unique DSP sound features like the ”Augmented Bass Processing”, the “StageXpander” or the “RealCenter“ function which open new possibilities to tweak your audio system.

Features:

  • Extremely powerful “fixed point” Audio DSP with 64 Bit resolution and 1.2 billion MAC operations per second

  • High Resolution audio bandwidth up to more than 40 kHz for unrivalled sound quality

  • ACO – Advanced 32 Bit CoProcessor for all control and communication tasks

    • 10 internal memory locations for sound setups

    • Setup switching within milliseconds

    • High-speed data transfer and improved usability

  • HELIX Extension Card slot (HEC) for system add-ons

  • Smart highlevel input with ADEP.3 circuit and Auto Turn-On function

  • Start-Stop capability down to 6V supply voltage

  • Unique DSP Sound Effects such as the “Augmented Bass Processing” which dynamically optimizes the bass response of the subwoofer, the “StageXpander” that significantly widens the stereo perspective, the “RealCenter” function, which allows a perfectly focussed sound staging for both driver and co-driver and much more

  • Freely definable signal routing with separate matrices for line, SPDIF and HEC/AUX

  • Optimal signal path and power supply for further improved sound quality

  • “Ground lift” switch to avoid ground loops

  • Very compact dimensions for easy integration into the vehicle

  • Easiest configuration via the intuitive DSP PC-Tool V4 software

P SIX DSP MK2

HELIX P SIX DSP MK2

The HELIX P SIX DSP MK2 6-channel amplifier is not built to solely deliver loads of clean power; it also incorporates a cutting-edge 8-channel DSP with outstanding processing power. This amalgamation sets a completely new standard with its “Ultra HD Class D” amplifier technology.

Thanks to its 96 kHz sampling rate and an extended audio bandwidth of more than 40 kHz, this technological feat of precision engineering raises the bar in terms of sound quality.

Features:

  • New “Ultra HD Class D” concept which combines the high-end sound quality of Class AB technology with the benefits of Class D amplifiers

  • Full audio bandwidth up to more than 40 kHz thanks to 96 kHz sampling rate

  • Cutting-edge, extremely powerful “fixed point” Audio DSP with 64 Bit resolution and 1.2 billion MAC operations per second

  • 24 Volts compatible without the need to make any changes to the unit

  • Six speaker outputs with up to 230 Watts RMS into 2 Ohms

  • Two processed RCA outputs

  • Inputs: 6 x RCA, 6 x Highlevel with up to 20V RMS input sensitivity, optical SPDIF input

  • Smart highlevel input with ADEP circuit

  • HELIX Extension Card slot (HEC) for additional input / output modules like Bluetooth® Audio Streaming, High Resolution Audio Streaming via USB etc.

  • Compact design with low heat dissipation thanks to ­extraordinary efficiency

  • Automatic Remote switch

V EIGHT DSP MK2

HELIX V EIGHT DSP MK2

The new multi-tool for professionals
The small addition in the product name makes the big difference – the V EIGHT DSP MK2 is the logical evolution of its already more than impressive predecessor. Same look as before but in the inside Audiotec Fischer brought in all of his expertise and substantially optimized the hardware.  The result is an 8-channel amplifier with ten processed DSP channels that is unrivalled in many ways.

Features:

  • Up to 160 W RMS output power per channel into 2 Ω

  • “Pure Class GD” concept for outstanding sound quality combined with best possible efficiency

  • Extremely powerful 64 Bit “fixed point” Audio DSP

  • ACO – Advanced 32 Bit CoProcessor platform for system and DSP features like:

    • ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals

    • SFX sound effects – Augmented Bass Processing, StageXpander, RealCenter & Co.

  • High power 8-channel highlevel input with up to 32 V RMS input sensitivity and ADEP.3 circuit

  • Two processed RCA / Cinch outputs

  • 1 to 1 Input / Output Routing (IOR) – same number of highlevel inputs and amplifier outputs

  • Virtual Channel Processing (VCP) allows even more flexible configuration for highly complex sound systems

  • HELIX Extension Card slot (HEC) for additional input / output modules like Bluetooth® Audio Streaming, High Resolution Audio Streaming via USB etc.

  • Compact design with low heat dissipation thanks to extraordinary efficiency

P ONE

HELIX P ONE

Elemental force with maximum control

The new P ONE will drive every subwoofer to the absolute maximum, since it delivers relentless power with 1,500 Watts RMS power into 1 Ohm. Its phenomenal stability predestines the P ONE as the ideal driver for any subwoofer configuration you can imagine and its enormous damping factor keeps every loudspeaker under full control. If that's still not enough, you can use the TwinPower Link to combine two amplifiers and double the output power.

Features:

  • High performance Class D mono amplifier with up to 1,500 Watts RMS @ 1 Ohm – a perfect match for all 2 x 2 Ohms subwoofers connected in parallel

  • Also usable as an ultra broadband amplifier with exceptional sound quality – ideal for High Resolution Audio

  • Extremely high efficiency and low heat dissipation with minimal dimensions

  • High damping factor for maximum speaker control

  • Regulated power supply with Start-Stop capability for extremely stable output power even during voltage drops

  • TwinPower Link for connecting two amplifiers in bridged mode

  • Optionally available HELIX Digital Input Module (HDM) to extend the amplifier with an optical digital input in SPDIF format

DSP PRO MK2

HELIX DSP PRO MK2

High Resolution audio at its best!

Thanks to numerous improvements, the new HELIX DSP PRO MK2 raises the bar to a new level, and not just in terms of sound quality.

Features:

  • Extremely powerful “fixed point” Audio DSP with 64 Bit resolution and 1.2 billion MAC operations per second

  • AD and DA signal converters of the latest generation with a native resolution of 32 Bit

  • High Resolution audio bandwidth up to more than 40 kHz for unrivalled sound quality

  • HELIX Extension Card slot (HEC) for additional input / output modules like Bluetooth® Audio Streaming, High Resolution Audio Streaming via USB etc.

  • Smart highlevel input with ADEP circuit (Advanced Diagnostics Error Protection)

  • Start-Stop capability down to 6V supply voltage

  • Freely definable signal routing with separate matrices for line, SPDIF and HEC/AUX

  • “Ground lift” switch to avoid ground loops

  • Control input for connecting remote controls and accessories

  • Time alignment with up to 20 ms delay time per channel, additionally reverse time alignment for in-phase summation of the inputs

  • Inputs: 8 x RCA/Cinch, 8 x Highlevel, 1 x optical SPDIF and 1 x coaxial SPDIF

  • Outputs: 10 x RCA/Cinch with max. 8 Volts output voltage

DSP.3

HELIX DSP.3

Our best 8-channel DSP

State-of-the-art technology in established design – the DSP.3 has been continually refined and presents itself as our best digital 8-cahnnel signal processor we have ever built.

Features:

  • Extremely powerful “fixed point” Audio DSP with 64 Bit resolution and 1.2 billion MAC operations per second

  • AD and DA signal converters from AKM with a native resolution of 32 Bit

  • High Resolution audio bandwidth up to more than 40 kHz for unrivalled sound quality

  • Unique DSP Sound Effects such as the “Augmented Bass Processing” which dynamically optimizes the bass response of the subwoofer, the “StageXpander” that significantly widens the stereo perspective, the “RealCenter” function which allows a perfectly focussed sound staging for both driver and co-driver and much more

  • ACO – Advanced 32 Bit CoProcessor for all control and communication tasks:

    • 10 internal memory locations for sound setups

    • Setup switching within milliseconds

    • High-speed data transfer and improved usability

  • InputEQ and ISA (Input Signal Analyzer) for easy analysis and compensation of input signals

  • HELIX Extension Card slot (HEC) for system add-ons like Bluetooth® Audio Streaming, High Resolution Audio Streaming via USB etc.

  • Smart highlevel input with ADEP.3 circuit and Auto Turn-On function

  • Start-Stop capability down to 6 V supply voltage

  • Optimal signal path and power supply for further improved sound quality

  • “Ground lift” switch to avoid ground loops

  • Easiest configuration via the intuitive DSP PC-Tool V4 software

Please reload